Top of the line 60" class professional grade model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement. Works great as an add-on to the side of a riding mower, zero turn mower or small tractor for larger yards. Can also be pulled with an UTV.
25HP Kohler Confidant commercial grade twin cylinder engine
The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 25mm (1") steel shafts and large sealed ball bearings.
The cutting height can quickly and easily be adjusted from 1.5"-5" with the two crank height adjustment system.
The main deck is built out of 10 GA (.135") thick steel with a 7 GA (.179") thick steel top plate for reinforcement.
Deep deck design with wide side discharge and inline blades for added capacity
Six anti-scalp wheels and safety zones are located in the front and rear of the mower.
The blades are engaged with an electric clutch which is activated by simply pulling a switch.
Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.
60" AcrEase Finish Cut Mowers Features:
- 60" Class
- 25 HP Kohler Commercial Grade Twin Cylinder Engine
- Commercial Grade
- 4 Tire Design
- Quick 2 Crank Height Adjust System
- Electric Clutch Blade Engagement
- Larger Diameter Tires and Heavier Wheel Supports than Our Other Models
Specification | |
| Class Mower | Professional |
| Engine Make | Kohler Commercial |
| Engine Model | Confidant OHV (Twin Cylinder with Cyclonic Air Filtration System) |
| Engine HP | 25 |
| Lubrication Method | Pressure with Filter (Low Oil Pressure Shut Off Included) |
| Electric Start | Yes |
| Number of Mower Blades | 3-20" |
| Blade Tip Speed (ft/min) | 17,500 |
| Cutting Width | 58" |
| Cutting Height | 1.5" - 5.0" |
| Blade Engagement Clutch | Electric |
| Height Adjustment Method | Crank On Each Side |
| Deck Metal Thickness | 10 GA |
| Deck Top Plate Thickness | 7 GA |
| Weight | 560 lbs |
| Pneumatic Fixed Rear Tire | 15/600x6, 4 Ply Turf |
| Pneumatic Front Tires on Casters | 13/500x6, Slick |
| # of Anti-Scalp Wheels Under Deck | 6 w/front skids(4 Front, 2 Rear) |
| Hour Meter/Tachometer | Yes |
| Oil Pressure Shut Off | Yes |
| Fuel Tank Size | 3 Gal. |
| Blade Spindles | 25mm Shaft |
| Bearing # | 6205-2RST |
| Drive Method | 1 B Section "V" Belt |
| Warranty | 1 Year Commercial (Engine - 3 Year Residential / 2 Year Commercial) |
