The M2-TS 1"" tweeter kit increases system overall sonic performance by adding to your existing M2 Color Optix™ full range speakers. The tweeter is protected with a stainless-steel mesh grille and can be installed using a flush or horn mount bezel. The Element Ready™ design and IPX6 certification makes them truly purpose-built for marine or motorsport applications where protection from damaging UV rays and water spray is essential. The M2-TS add-on tweeters do not incorporate built-in LEDs, but are designed to work with M2 Color Optix™ speakers that do.
The M2-TS allows the addition of component tweeters to any new or existing system. The Element Ready™ design is accomplished through the IPX6 rated front and grill and IPX5 frame. The UV Stable ASA plastic frame & grille design stands up to harsh marine environments, and the gold-plated Marine Grade brass connection terminals provide a corrosion resistant, maintenance free connection. The crossover is a fully sealed external passive 18dB/octave Audiophile Grade high pass crossover utilizing metalized polyester film capacitors selected for their dependability, long life span and preferred electrical characteristics. Kit includes back-mount flush kit and white horn-loaded mount bezel.
1"" Marine Add-On Tweeter Kit Features:
- High efficiency 1"" (25mm) Tweeter Kit
- Customizable Mounting (Flush Mount or Horn Mount)
- External 18dB/Octave audiophile grade high pass crossover
- IPX6 Rated Front and Grille with IPX5 Frame
- Aluminum Diaphragm
- Marine grade PEI rubber surround
- High Temperature Kapton voice coil former
- Neodymium motor structure
- Dual clamp tweeter mounting system
- Mounting hardware included
- All marine grade construction
Specifications:
- Speaker Type - Tweeter Add-On Kit
- Tweeter Mounting Depth-1.44"" (36.7 mm)
- Midrange Size (Nominal Diameter)-N/A
- Power Handling (RMS)-200 Watts RMS 800 Watts Peak
- Nominal Impedance (Ohms)-4-Ohm
- Midrange Mounting Depth-N/A
- Tweeter Size-1” (25.4 mm)
- Crossover-18dB/Octave
- Sensitivity (dB @ 1W/1M)-97
- Sensitivity (dB @ 2.83V)-100
- Frequency Response (Hz)-1,425 Hz - 25 kHz
- Mounting Hardware-Yes
- Grille/Trim Ring Included-Yes
Featured Blog Post: Visit our blog to see which off-road audio setups offer the best bang for the buck!
