4"" rough cut model with a commercial grade twin cylinder electric start engine and manual clutch blade engagement. Works great behind an for smaller average jobs or tight clearance conditions.
23HP Briggs & Stratton Commercial Turf commercial grade twin cylinder engine
The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16"") steel shafts, machined steel blade holders and large sealed ball bearings.
The cutting height can quickly and easily be adjusted from 2""-8"" with the single crank height adjustment system.
The main deck is built out of 10 GA (.135"") thick steel with a 3/16"" thick steel top plate for reinforcement. An additional 1/4"" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8"" thick.
Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
The blades are easily engaged by simply shifting a manual clutch lever.
The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time
44"" Rough Cut Mowe Features:
- 44"" Cutting Width
- 23 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
- Commercial Grade Deck Assembly
- 4 Tire Design
- Quick Single Crank Height Adjust System
- Height Adjustment Range From 2""to 8""
- Manual Clutch Blade Engagement
- Conservative 2"" Diameter Sapling Rating
- Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle
